Xray Flare Meter
GitHub link: https://github.com/bigcrimping/flare_meter
An Arduino Nano 33 IoT based gadget which interrogates the latest x-ray flare class information from NOAA GOES Satellite and shows the result visually.
Inspired by a burst of transmission errors picked up in my day job we linked back to a coronal mass ejection I wanted something to show me what the current state of solar flares is.
The data is provided by NOAA in JSON via the website here: https://services.swpc.noaa.gov/json/

The data presented is from the GOES 16 Satellite.
Using (the excellent) X.27 Stepper motor interface from snafu: https://www.tindie.com/products/boffin/serial-x27-stepper-motor-gauge/
The code is an amalgamation from the following sources
WiFi https://www.arduino.cc/reference/en/libraries/wifinina/wifi.beginap/
SSL https://www.arduino.cc/reference/en/libraries/wifinina/client.connectssl/
JSON Handling https://arduinojson.org/v6/api/json/deserializejson/
Project Code
The code is here: https://github.com/bigcrimping/flare_meter/tree/main/arduino_code/flare_meter_0.1
You will need to add your WiFi details to the arduino_secrets.h file for the network you wish to connect to.
Wiring
The wiring is as below, hook up for power/gnd/TX

Inside the chassis it looks like the below

Mechanical Files

The design comprises (from left to right) a
- Front Plate
- Spacer
- Back Plate (which mounts the motor)
- Chassis
- Rear Cover
The needle passes through the spacer to connect to the motor, the Arduino mounts to the Rear Cover with a dab of glue
The M3 nuts should be a press fit into the mounting holes but may require a dab of super glue.
Fixing required
10 x M3 nuts
10 x M3x12mm cap head bolts
STLs for printing available here: https://github.com/bigcrimping/flare_meter/tree/main/mechanics
Dial Artwork
Artwork can be found in PDF format here: https://github.com/bigcrimping/flare_meter/tree/main/dial_artwork

There are a few variations to choose from